VVR 200 - Vibrating conveyor

Data sheet

Table of technical data

Motor power max. 7,5 kW
Conveying capacity volume 125 m³/h
Total length 24 m
Clear width 550-1,50 mm
Maximum inclination 3 °

Which model suits your needs?

Specification
VVR 80
VVR 120
VVR 150
VVR 200
VVR 250
VVR 300
Motor power max. 5,5 kW max. 5,5 kW max. 7,5 kW max. 7,5 kW max. 11 kW max. 15 kW
Weight - - - - - -
Conveying capacity volume 40 m³/h 70 m³/h 110 m³/h 125 m³/h 150 m³/h 220 m³/h
Total length 28 m 26 m 24 m 24 m 20 m 18 m
Clear width 350-750 mm 450-950 mm 450-1,250 mm 550-1,50 mm 550-1,250 mm 650-1,450 mm
Maximum inclination 3 ° 3 ° 3 ° 3 ° 3 ° 3 °

Materials

Start-up lumps

The processing and recycling of waste from the plastics processing industry is economically attractive due to the savings in costs for new raw materials. Plastics processors can enable a consistent quality. This issue is significant when using engineering plastics with the highest mechanical properties since they are costly to produce.

Residual wood

Vecoplan equipment is specialized in processing this material into wood chips and then making it available as a raw material for the paper and board industry, for pellet production or as fuel for wood-burning systems.

Production waste

More and more plastics processing companies that manufacture a wide variety of plastic products are taking advantage of the opportunity to return production and process waste to the internal cycle. This saves raw material costs, plus the disposal costs for external recycling plants.

Waste paper

Wastepaper collected from households & commercial companies and even misprints from the printing industry are efficiently processed in paper industry plants to produce new paper, cardboard and paperboard.

Textiles & Non-woven material

Textiles or woven materials made from natural materials such as wool, cotton or synthetic & blended fabrics are processed into fibres in unique processes. For impurities such as buttons, zippers, etc., reliable separation technology is used in the plant.

Pre-Products

The recycling of plastics which are expensive to produce due to their technical properties and are often used to manufacture semi-finished products offers some potential savings for manufacturing companies. However, clean separation of the different plastics is a prerequisite. The pure regranulate obtained can then be used to produce sophisticated plastic components.

Cardboard, paper tubes

The use of transport packaging will continue to play an essential role in the future, making it all the more important to keep the recycling rate as high as possible to conserve energy and resources.

Hard plastic

In contrast to the processing of lightweight packaging, which is primarily well organised today, hard plastics were still often thermally recycled in the past. However, the recycling rate of these materials is now also increasing thanks to optimised treatment processes.

Film

Waste generated during production should, if possible, be returned directly to the internal production cycle without any losses or loss of quality. If such in-house recycling is not possible due to company-specific constellations, external recycling companies can also process film waste.

Production waste

The requirements for handling production rejects range from destroying misprints at publishers to reducing the volume of waste temporarily stored in print shops and preparing it all for paper recycling.

Big bags and bulk material containers

In order to return extremely tear-resistant plastic fabrics such as big bags to the production cycle, they have to be processed. The key component for this is the shredder. The more efficient the shredder, the safer the subsequent processes. With Vecoplan, these robust and often contaminated connective tissues can be efficiently processed.

Bark

Bark can be thermally recycled as fuel and further processed into bark mulch or bark litter.

Fibres, filaments & yarns

For all their differences, the residual materials from the production of fibres, filaments and yarns share some particular mechanical properties: Toughness and high wear and tear resistance, combined with a high degree of elasticity. These present particular challenges for the shredding process.

Paper industry waste

Braids, spits, bears or fibre residues are the recyclable residues in paper recycling. The technical jargon under the collective term: pulper waste. As a leading specialist for shredding technology, we know what is important in this application. Pulper waste is diverse. The plastic it contains can be used thermally. The metal wires but also existing non-ferrous metal can be reused as recycling material.

Film

Regranulates can be created as secondary raw materials from packaging, agricultural film, composite film, etc. The treatment process for this includes shredding technology, separation and sorting technology, washing and subsequent extrusion.

Packaging

As the demand for high-quality regranulates increases, closed-loop recycling is playing an increasingly important role in the material recovery of plastics, and this is why shredding is a critical process step since it is a preliminary stage for the subsequent sorting of recyclable materials.

Wood chips

Wood chips are used in the manufacture of chipboard and medium-density fibre (MDF) boards. They are also used as fuel in heating plants, in combined heat and power plants and in gardening and landscaping.

Fibres, filaments & yarns

The particular challenge in the mechanical treatment of used cords and yarns is not only that they are made of highly tear-resistant, thin and partly viscoplastic material, but they are also tangled and contaminated by stones, wood debris and other impurities.

Wood and milling chips

Planing and milling chips are usually reground and then used as insulation material or, for example, in the production of pellets.

Hollow body containers

As the demand for the use of recyclates made from polyolefins – especially HDPE and PP – is constantly increasing, the collection and processing of these containers are also playing an increasingly important role. Here we must ensure that we adapt our machines and plants to the requirements of the materials.