VEZ - RDF shredder

For single-stage RDF production

The Vecoplan VEZ RDF shredder can be used variably: In single-stage shredding, it is used for the production of sortable and conveyable material for refuse-derived fuel generation from production residues for the production of a grain size of up to < 50 millimeters. The initial grain size can be changed by different screen perforations. The high-performance cutting unit is characterized by the generation of a homogeneous grain structure, maximum throughput capacity and reduced heat generation for an energy-saving shredding process.

VEZ - RDF shredder (pre-shredding)

High-performance in RDF processing

Our VEZ single-shaft shredder use the best Vecoplan technologies. The machines are excellently equipped and benefit from many well thought-out detail solutions in the shredding process. The HiTorc® drive and W rotor are patented systems that are only available from Vecoplan. This enables us to implement unique solutions for you in RDF processing that give you clear competitive advantages.

The highlights of the VEZ - RDF shredder

Extremely flexible and reliable - Pure shredder power

The machine housing consists of an extremely robust construction with optimal machine geometry. It forms the basis for efficient and trouble-free operation. Interchangeable screen linings in a wide range of variations enable use both in primary shredding and in single-stage shredding of refuse-derived fuels. Very good maintenance accessibility and possible removal of impurities are ergonomically possible through a large maintenance door and a hydraulic bottom flap.

Your advantages at a glance

  • Robust and durable design for extreme conditions
  • Unlimited flexibility through various configuration options
  • Highest reliability and availability
  • Cost minimisation through energy efficiency
  • Ergonomic machine design for optimum maintenance and service accessibility
  • Best added value through consistently high and homogeneous output
  • Intuitive machine operation via VSC. Control
  • Online support and optimisation via the Vecoplan Smart Center

The power pack among the single-shaft pre shredders

The Vecoplan VEZ offers maximum efficiency and profitability in RDF processing. In RDF processing, it is also used as a pre-shredder to produce sortable and conveyable material from production residues with a particle size of less than 250 millimetres.

Successfully implemented projects with international clients


Frequency-controlled, powerful HiTorc-Drive with a drive power of 155 kW
Energy saving of up to 60 %
Virtually maintenance-free and noiseless

The multi-part counter knife is easy to adjust and replace. Due to the small blade gap, an optimised cutting performance can be achieved - consistent throughput and consistent quality

In the event of tramp materials, the tramp material detection system intervenes and protects the machine. Thanks to the hydraulic base flap, the contaminant can be removed quickly. This results in only a short downtime.

Patented W rotor:
With 3 rows of cutters in a cutting-optimised W layout with a total of 54 or 69 cutters (110 x 110 mm). Each knife can be used up to 4 times. You achieve a long service life and the costs remain low.

The integrated and intuitive VSC.control operating panel serves as a communication medium for the modern control system and as a link to our technicians. Of course, you can also use it to operate the machines easily and intuitively. This is an enormous relief, especially when you have to process different materials with different requirements. The VSC.control panel is designed for durable and robust operation in a demanding environment. 

PDF | 0.89 MB
Product brochure-single-shaft shredder-RDF shredder-VEZ 3200-EN

Which model suits your needs?

Specification VEZ 2500 TV VEZ 3200 TTV
Type of drive Direct drive HiTorc Direct drive HiTorc
Motor power 155 kW 2 x 155 kW
Speed range 20 - 100 1/min 20 - 100 1/min
Rotor length 2,500 mm 3,200 mm
Rotor diameter 800 mm 800 mm
Weight 28 to 35 to
Rotor geometry Cutting crowns 80 x 80 mm
W rotor: 104 pcs or 130 pcs

Cutting crowns 110 x 110 mm
W rotor: 54 pcs
Cutting crowns 80 x 80 mm
W rotor: 132 pcs or 165 pcs

Cutting crowns 110 x 110 mm
W rotor: 69 pcs
Dimension (Length) 2,770 mm 2,770 mm
Dimension (Width) 5,790 mm 6,490 mm
Dimension (Height) 2,600 mm 2,600 mm

Can be used for following material

Paper and cellulose
Domestic and industrial waste
Alternative fuel
Plastics - post-consumer