Friktionswäscher

Vorreinigung bei stark verschmutzten Kunststoffen

Der Friktionswäscher garantiert ein gründliches Einweichen von Altkunststoffen mit großer Kreislaufwassermenge. Häufig auftretende hartnäckige Verunreinigungen können durch diese Vorreinigung leicht beseitigt werden.

Einfache Beseitigung bei höheren Verschmutzungsgraden

Schonender Wassereinsatz

Der Friktionswäscher weicht in einer ersten Reinigungsphase (Vorwäsche) den Kunststoffabfall mittels einer großen Wassermenge, die kontinuierlich im Kreislauf zirkuliert, ein. So wird der Einsatz von Frischwasser bei sehr guten Qualitätsergebnissen reduziert.

Häufig auftretende Verunreinigungen von Kunststoffen:

  • Schlamm und Erde an Landwirtschaftsfolie
  • Papieretiketten aus Haushaltsund Industriefolie
  • Nahrungsrückstände von Post Consumer Kunststoffen

Im Anschluss daran sind die Verschmutzungen gut eingeweicht und können in der zweiten Stufe (Nachreinigung) endgültig entfernt werden.

Mehr Kraft für ein effizienteres Waschen.

Die perfekte Kombination für stark verschmutzte Kunststoffe.

Bei dem Prozess des Waschens setzen wir auf eine doppelt starke Lösung: der Friktions- und der Intensivwäscher ergeben ein starkes Team für eine gründliche und kontinuierliche Reinigung.

Intensivwäscher kennenlernen

Can be used for following material

Domestic and industrial waste
Plastics - post-consumer
Plastic - post-industrial
All

Domestic waste

Residual waste is optimally handled by shredding it in mechanical-biological waste treatment plants (MBT) and separating the various recyclable materials from each other. Another use of residual waste is thermal utilisation in a waste incineration plant. The heat released is used both to generate electricity and to provide heat.

Lightweight packaging

Increasing the recycling rate of packaging with the aim of recycling more valuable materials than before is a key issue in the circular economy. In order to efficiently recycle the packaging collected in bags, this waste must be continuously and reliably sorted.

Hard plastic

In contrast to the processing of lightweight packaging, which is primarily well organised today, hard plastics were still often thermally recycled in the past. However, the recycling rate of these materials is now also increasing thanks to optimised treatment processes.

Big bags and bulk material containers

In order to return extremely tear-resistant plastic fabrics such as big bags to the production cycle, they have to be processed. The key component for this is the shredder. The more efficient the shredder, the safer the subsequent processes. With Vecoplan, these robust and often contaminated connective tissues can be efficiently processed.

Films – A second life even after intensive use and contamination

Regranulates can be created as secondary raw materials from packaging, agricultural film, composite film, etc. The treatment process for this includes shredding technology, separation and sorting technology, washing and subsequent extrusion.

Packaging

As the demand for high-quality regranulates increases, closed-loop recycling is playing an increasingly important role in the material recovery of plastics, and this is why shredding is a critical process step since it is a preliminary stage for the subsequent sorting of recyclable materials.

Hollow body containers

As the demand for the use of recyclates made from polyolefins – especially HDPE and PP – is constantly increasing, the collection and processing of these containers are also playing an increasingly important role. Here we must ensure that we adapt our machines and plants to the requirements of the materials.

Pre-Products

The recycling of plastics which are expensive to produce due to their technical properties and are often used to manufacture semi-finished products offers some potential savings for manufacturing companies. However, clean separation of the different plastics is a prerequisite. The pure regranulate obtained can then be used to produce sophisticated plastic components.

Films – Industrial production waste

Waste generated during production should, if possible, be returned directly to the internal production cycle without any losses or loss of quality. If such in-house recycling is not possible due to company-specific constellations, external recycling companies can also process film waste.

Events