Table of technical data Motor power 7.5 - 11 kW Screening capacity 135-225 Which model suits your needs? Specification VSS 1500 VSS 3000 VSS 6000 VSS 9000 Motor power 3 kW 4 kW 5,5 - 7,5 kW 7.5 - 11 kW Weight - - - - Screening capacity 22,5 45 90-150 135-225 The sieving capacity depends on the drive power. (7,5 kW = ca. 135 m³/h) ( 11 kW = ca. 225 m³/h) Materials Wood Chips – Efficient Processing for Energy & Panel Production Wood chips are used in the manufacture of chipboard and medium-density fibre (MDF) boards. They are also used as fuel in heating plants, in combined heat and power plants and in gardening and landscaping. Wood and milling chips Planing and milling chips are usually reground and then used as insulation material or, for example, in the production of pellets. News 24.06.2026 Vecoplan’s new shredding line cuts energy consumption by half Stricter quality requirements, excessive fines content, and high energy consumption: the recovered wood processing operation at Meinhardt Holzwerk's Mainz-Wiesenau site had reached its limits. Working closely with renowned machinery manufacturer... 14.04.2026 The new Vecoplan VEZ 3300 single-shaft shredder – now available in a mobile version for the first time With the new edition of its VEZ machine series, Vecoplan AG is bringing fresh momentum to the world of single-shaft shredders: The new VEZ 3300 will now be available not only as a stationary unit but also in a mobile version. With this move, the... Blog 16.06.2025 More efficiency, less energy: the new biomass chipper with HiTorc drive Whether sawmill, biomass cogeneration plant or chipboard manufacturer - anyone involved in wood processing knows the challenges: Machines run continuously, material throughput must be high and downtimes cause direct economic losses. At the same time,... 01.02.2024 Cross-Laminated Timber Cross-laminated timber (CLT) is manufactured on the basis of renewable resources. It binds carbon dioxide, is lighter than concrete and production waste can be recycled. Success stories Waste-wood processing plant for Tschopp Holzindustrie AG Tschopp Holzindustrie, based in Switzerland, has been producing high-quality formwork panels since 1920 and is the only Swiss manufacturer to produce these panels specifically for the construction industry. Tschopp also uses the chips it produces to... Cutting-edge technology for sawmill residues Sawmill residues and bark provide valuable energy for the plant, while sawdust forms the basis for pellet production.... Where there's sawing, there's chipping WUN Bioenergie, a joint venture between SWW Wunsiedel GmbH and GELO-Holzwerke, utilises wood from the Fichtelgebirge region for the production of solid construction timber. The waste wood is either processed into pellets or utilised in a biomass... Events 01.12.2026 - 05.12.2026 19. Türkçimento Enabling managers follow new developments concerning the cement sector and to provide a comparison environment for the investments they are considering for their businesses. Contact persons worldwide Your direct contact to us! No matter whether your location is in Germany, the USA, Great Britain, Spain, Poland or somewhere else in the world: We always have the right contact person for you. At any time you can reach an expert from our company by phone or e-mail, who takes care of your concern competently. contact us now
24.06.2026 Vecoplan’s new shredding line cuts energy consumption by half Stricter quality requirements, excessive fines content, and high energy consumption: the recovered wood processing operation at Meinhardt Holzwerk's Mainz-Wiesenau site had reached its limits. Working closely with renowned machinery manufacturer...
14.04.2026 The new Vecoplan VEZ 3300 single-shaft shredder – now available in a mobile version for the first time With the new edition of its VEZ machine series, Vecoplan AG is bringing fresh momentum to the world of single-shaft shredders: The new VEZ 3300 will now be available not only as a stationary unit but also in a mobile version. With this move, the...
16.06.2025 More efficiency, less energy: the new biomass chipper with HiTorc drive Whether sawmill, biomass cogeneration plant or chipboard manufacturer - anyone involved in wood processing knows the challenges: Machines run continuously, material throughput must be high and downtimes cause direct economic losses. At the same time,...
01.02.2024 Cross-Laminated Timber Cross-laminated timber (CLT) is manufactured on the basis of renewable resources. It binds carbon dioxide, is lighter than concrete and production waste can be recycled.
Waste-wood processing plant for Tschopp Holzindustrie AG Tschopp Holzindustrie, based in Switzerland, has been producing high-quality formwork panels since 1920 and is the only Swiss manufacturer to produce these panels specifically for the construction industry. Tschopp also uses the chips it produces to...
Cutting-edge technology for sawmill residues Sawmill residues and bark provide valuable energy for the plant, while sawdust forms the basis for pellet production....
Where there's sawing, there's chipping WUN Bioenergie, a joint venture between SWW Wunsiedel GmbH and GELO-Holzwerke, utilises wood from the Fichtelgebirge region for the production of solid construction timber. The waste wood is either processed into pellets or utilised in a biomass...
01.12.2026 - 05.12.2026 19. Türkçimento Enabling managers follow new developments concerning the cement sector and to provide a comparison environment for the investments they are considering for their businesses.
Contact persons worldwide Your direct contact to us! No matter whether your location is in Germany, the USA, Great Britain, Spain, Poland or somewhere else in the world: We always have the right contact person for you. At any time you can reach an expert from our company by phone or e-mail, who takes care of your concern competently. contact us now
